Total Multis Complex SHD 2
01736 757002VISCOSITY - ISO 120
Total Multis Complex SHD 2 Lubricating grease
Total Multis Complex SHD 2 High temperature synthetic grease.
- A semi-synthetic grease designed to operate over a very wide temperature range.
- Ideal for use in both automotive and industrial applications, where high temperatures
are combined with steam or wet environments. - Where low-temperature pumpability is required.
- Always avoid contamination of the grease by dust and/or dirt when applying.
Preferably use a pneumatic pump system or cartridges.
Total Multis Complex SHD 2 Lubricating grease Product Advantages:
- Long life at high temperatures.
- Excellent adhesive properties.
- Excellent anti-corrosive and EP properties.
- Working temperature range continuous: – 25 °C to 160 °C.
- Wide range of applications.
- Excellent resistance to rust, corrosion and oxidation.
- Increased protection against water ingress.
- Extended lubrication intervals.
- Reduced wear under heavy loads.
- Excellent pumpability at low temperatures.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Soap/thickener
| – | Lithium complex | |
| NLGI grade
| ASTM D 217/DIN 51 818 | – | 2 |
| Colour
| Visual | – | Blue |
| Appearance
| Visual | – | Smooth |
| Operating temperature range
| °C | – 25 to 160 | |
| Penetration at 25°C
| ASTM D 217/DIN51 818 | 0.1 mm | 265-295 |
| Four ball weld load
| DIN 51 350-4 | daN | 260-280 |
| Anti-rust performance | SKF- EMCOR DIN 51 802/IP220/NFT 60-135/ISO 11007
| rating | 0-0 |
| Dropping point
| IP 396/DIN ISO 2176 | °C | > 250 |
| Kinematic viscosity of the base oil at 40°C
| ASTM D 445/DIN 51 562-1/ISO 3104/IP71 | mm²/s (cSt) | 120 |
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
