Quaker Houghton Fenella VD 601 N

FENELLA VD 601 N is based on high purity solvent with low aromatic content. The additives are selected to provide high lubricity in combination with low residue after evaporation.
FENELLA VD 601 N is free from Chlorine, Sulphur, Phosphorous and heavy metals (Zinc)

FENELLA VD 601 N is a volatile product for stamping and drawing of thin to medium thickness non-ferrous and ferrous materials.
FENELLA VD 601 N leaves small residual film and doesn’t react with paint.

o Reduced cost – higher production rates due to strong lubricity
o Reduced cost – easy to be washed off with standard cleaners
o Satisfied staff – good EHS profile, reduced smell.
o Satisfied staff – light color for good monitoring of the operation

• Colour  – pale yellow
• Specific Gravity@ 20 °C kglm133 –  780
• Kinematic Viscosity @ 40°(, mm2/s –  1.5
• Flash Point PMCC °C  – 60
• Pour Point °C  – -21
• Copper Corrosion – 1a

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective.
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907 /2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67 /548/EEC or 1999/45/EC.

For further information on this product or current substitutes, please Contact Us.