Quaker Houghton Fenella B 2814

FENELLA OIL B 2814 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
FENELLA OIL B 2814 is free from Chlorine and heavy metals (Zinc)

FENELLA OIL B 2814 is a high performance product for difficult fine blanking and stamping operations. The product can be used for fine blanking and drawing of steel, stainless steel and aluminum alloys.
FENELLA OIL B 2814 is especially developed to replace chlorinated product in most of the applications.

o Reduced cost – improved tool life due to high EP power
o Reduced cost – less energy consumption due to high EP and I ubricity
o Reduced cost – easy to be washed off with standard cleaners
o Satisfied staff – good EHS profile, free from Chlorine and other suspect substances.

• Colour – amber
• Specific Gravity@ 20 °C kg/m/33  – 990
• Kinematic Viscosity @ 40°C, mm2/s  – 250
• Flash Point COC °C  -180
• Pour Point °C  –36
• Copper Corrosion  -4c

RELATED PRODUCTS
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective.
For more information, please contact your local Houghton representative.
STORAGE
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°( unless otherwise specified. Use stock in delivery rotation.
HEALTH AND SAFETY
Safety data sheets are available in accordance with Regulation (EC) No 1907 /2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67 /548/EEC or 1999/45/EC.

For further information on this product or current substitutes, please Contact Us.