Quaker Houghton Cut-Max SH 10

CUT-MAX SH 10 is based on hydro-treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load-carrying properties. The oil provides a good surface finish for the machined work pieces. The oil is free from zinc, chlorine and active sulphur

CUT-MAX SH 10 is a high-performance honing, finishing and grinding oil mainly used for the grinding of cam and crankshafts in combination with belt finishing machines. The oil is designed for use with fine filtration units. It shows also good result for grinding and honing in the bearing industry.
Approved by Junker

o Reduced cost – energy saving
o Increased productivity – long tool life
o Secure handling – clean working environment

• Colour –  amber
• Specific Gravity@ 20 °C kg/m³  – 850
• Kinetic Viscosity@ 40°C, mm²/s  – 9
• Flash Point CDC °C – 155
• Pour Point °C  – -20
• Copper Corrosion  – 1a

This lubricant is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.

Quaker Houghton Cut-Max SH 10