Quaker Houghton Cut-Max DC 22

CUT-MAX DC 22 is based on hydro treated mineral oil with 1011v aromatic content. A cornbination of polar, extreme
pressure and anti-wear additives provide the oil with high load
carrying properties. The oil provides good surface finish of the
machined work pieces.
CUT-MAX DC 22 contains active sulphur and may discolour yello11v metals. The oil is chlorine free.

CUT-MAX DC 22 is a product for severe machining of steel, nickel alloys and titaniurn. Excellent results are achieved for the
BT A drilling of hydraulic cylinders as well as for severe
application in the aerospace industry.
CUT-MAX DC 22 is a versatile product for all copper free materials.

o Increased productivity – long tool life
o Reduced cost – energy saving
o Reduced cost – long sump life

• Colour – yellow
• Specific Gravity@ 20 °C kglm3 – 870
• Kinetic Viscosity@ 40°C, mm2/s – 22
• Flash Point CDC °C – 200
• Pour Point °C –  n.d.
• Copper Corrosion – 4a

CUT-MAX DC 22 is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective.
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.

For further information on this product or current substitutes, please Contact Us.