Quaker Houghton Cut-Max BR 17

CUT-MAX BR 17 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
CUT-MAX BR 17 contains active sulphur and may discolour yellow metals. The oil is chlorine free

CUT-MAX BR 17 is designed for all machining of steel where a low viscosity EP oil is required CUT-MAX BR17 is designed for automotive industry applications including broaching, gear hobbing and deep drilling.
CUT-MAX BR 17 is particularly suitable tor vertical broaching of con-rods at speeds of up to 12 metres per minute.

• Increased productivity- long tool life
• Increased productivity_ less scrap
• Reduced Cost – energy saving
• Reduced cost – long sump life

• Colour – yellow
• Specific Gravity@ 20 °C kglm3 – 870
• Kinetic Viscosity@ 40°C, mm2/s – 17
• Flash Point CDC °C – 180
• Pour Point °C – n.d.
• Copper Corrosion – 4c

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.

For further information on this product or current substitutes, please Contact Us.