Viscoleb™ Sprays are chain lubricants especially developed to meet the requirements of the food and beverage
industries. They are water-resistant and have a high load carrying capacity.

Viscoleb Sprays are tasteless and odorless oils. Special additives specifically protect from wear and prevent corrosion.
Viscoleb Spray chain lubricants are NSF H1 authorized and therefore suited for applications where a direct exposure of the
lubricated part to the edible product is possible due to technical reasons. They are also Kosher and Halal approved.

• For the special requirements in the food and beverage industries where there may be direct exposure of the
  lubricated part to the edible product or its packaging
• For chains of production, filling and packaging machines
• For slideways, central lubrication systems, spraying systems (product consolidation)
• Viscoleb 32 Spray especially for chains in the low-temperature range e.g. in frosters
  • Temperature application ranges:
  • Viscoleb 32: – 60°C/- 76°F to + 150°C/+ 302°F
  • Viscoleb 280: – 30°C/- 22°F to + 200°C/+ 392°F
  • Viscoleb 1500: – 20°C/- 4°F to + 200°C/+ 392°F

• NSF H1 authorized
• Tasteless and odorless
• Transparent
• Resistant to water
• Compatible with mineral oil, therefore no prior cleaning of the chains when converting to Viscoleb
• Good penetration
• Excellent adherence
• Optimum corrosion and wear protection

• Above properties are without (Propane/Butane) propellant.
• Viscoleb oils are compatible with mineral oil, therefore prior cleaning of the chains is not necessary during
  conversion.
• However, cleaning of heavily contaminated chains is advisable in order to ensure easy penetration of Viscoleb.
• For application in central lubrication and spraying systems please observe the specified viscosity.

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us 

Safety Data Sheet