Castrol Tribol SHF Spray
VISCOSITY - ISO 128
Castrol Tribol SHF Spray Semi-synthetic Adhesive Lubricant
Castrol Tribol™ SHS Spray (Previously called Castrol Optimol™ SHF) is a transparent, adhesive lubricant containing solvents. It is especially suited for the lubrication and protection of large-linked chains and wire ropes in the wet section.
For application points with difficult access, Tribol™ SHF Spray is recommended.
- Chains, wire ropes, guides, slide ways.
- In wet sections and underwater applications.
- Temperature application range: – 25°C/- 13°F to + 180°C/+ 356°F
Castrol Tribol SHF Spray Semi-synthetic Adhesive Lubricant Product Advantages:
- For lubrication points with difficult access
- Extraordinary adhesive power and resistance to throw off after evaporation of the solvent.
- Excellent creeping and penetrating properties.
- Extreme load-carrying capacity.
- Optimum wear protection.
- Resistant to cold and hot water, fruit acids.
- Reliable corrosion protection even in aggressive environments.
Operating temperature | Max. 71°C |
---|---|
Viscosity | 128 mm/s² at 40°C |
Oil type | Synthetic |
Ester/EP additives | Yes |
Product type | Lubricating Oils |
Applicable to these sectors | Automotive Manufacture |
* = Measured with solvent, ** = Measured without solvent.
Properties are without (Propane/Butane) propellant.
Easy application due to special ball valve for all spraying directions.
Shake spray can well before use. It produces a foam which remains until the lubricant has penetrated into the friction
point.
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields