Castrol Power 1 Racing 4T 10w-50
VISCOSITY - SAE 10w-50
Castrol Power 1 Racing 4T 10w-50 Race Derived Technology
Castrol Power 1 Racing 4T 10w-50 is fully synthetic engine oil for a modern, high-performance 4-stroke sports bike that increases engine acceleration and power right up to the maximum.
Castrol Power 1 Racing 4t using “Race Derived Technology” based on Castrol’s long and successful racing association, flows fast and stays strong, reducing internal engine friction even under the most arduous riding conditions.
It has been tested and proven to deliver exceptional acceleration and power at the touch of the throttle. The added Castrol advantage of Trizone Technology ensures uncompromised performance protection, its ultimate performance for extreme riding.
Castrol Power 1 Racing 4T is designed for high performance 4-stroke sports bikes to deliver optimum power and protection in all riding conditions.
It is suitable for all makes of 4-strokes bikes, both carburettor and fuel injected where API SL (and below) and JASO MA or MA2 specifications are recommended.
Castrol Power 1 Racing 4T 10w-50 Race Derived Technology Advantages:
- Ultimate performance in extreme riding
- oil flows fast and stays strong, reducing internal engine friction
- Tested and proven to deliver exceptional acceleration at the touch of the throttle
- Fully synthetic 4-stroke motorcycle engine oil with Trizone protection of engine, clutch and gears
- Complies with requirements of catalyst-equipped engines
Name | Method | Units | POWER1 Racing 4T 10W-50 |
Density @ 15C, Relative
|
ASTM D4052 | g/ml | 0.85 |
Viscosity, Kinematic 100C
|
ASTM D445 | mm²/s | 17 |
Viscosity, CCS -25C (10W)
|
ASTM D5293 | mPa.s (cP) | 5000 |
Viscosity, Kinematic 40C
|
ASTM D445 | mm²/s | 110 |
Viscosity Index
|
ASTM D2270 | None | 168 |
Flash Point, PMCC
|
ASTM D93 | °C | >180 |
TBN | ASTM D2896 | mg KOH/g | 9.8 |
API SN
JASO MA2
Storage:
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.