Castrol Molub-Alloy Paste HT
01736 757002Castrol Molub-Alloy Paste HT High Temperature Assembly Paste
Castrol Molub-Alloy™Paste HT (previously called Optimol™ Paste HT) is a copper-colored, high temperature assembly paste for thermally loaded screw connections and fits. The extraordinarily good separating ability at temperatures up to + 1100°C/ + 2012°F prevents burning, welding or scaling of connections even for extremely long periods.
For screw connections and other connections in the high temperature range up to +1100°C/+2012°F.
- For fittings and instruments even when subjected to very high pressures, corrosion and thermal influences that require an assembly paste with excellent sealing properties.
- Temperature application range: – 30°C/- 22°F up to + 1100°C/+ 2012°F.
Castrol Molub-Alloy Paste HT High Temperature Assembly Paste Product Advantages:
- Easy handling, soft and spreadable consistency.
- Extreme load-bearing capacity.
- Protects against corrosion and scaling.
- Prevents welding, seizing and burning.
- Excellent separating ability.
- Limited resistance to acids and alkaline solutions.
- Good sealing effect.
| Operating temperature | Min. -30°C Max. 1100°C |
|---|---|
| Viscosity | 1240 mm/s² at 40°C |
| NLGI | 1 |
| Oil type | Ester |
| Thickener | Inorganic |
| Food grade | No |
| Product type | Greases |
| Applicable to these sectors | Automotive Manufacture, Machinery, Metals, Pulp & Paper |
Conditions of Use
- Clean surface. Apply an even layer of Molub-Alloy Paste HT with brush or lint-free cloth.
- To achieve a good sealing effect, apply Molub-Alloy Paste HT in sufficient quantity down to the thread root.
- Before assembly coarse contamination should be removed from the threads with a steel brush.
- Molub-Alloy Paste HT is only suited for paste-specific applications – it cannot replace oil or grease lubrication.
- Please avoid mixing with other pastes, greases or oils.
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
