Castrol Braycote 194 is a dark brown, liquid corrosion preventive compound intended for indoor exposure. It is a solvent cutback material designed for cold application, and dries in approximately two hours, leaving a firm, amber, transparent film that will not flow below 175°F (80°C).

Braycote 194 is designed to protect unpainted metal surfaces from the effects of indoor or shed exposure for periods up to one year. It is non-corrosive and readily wets the surfaces of commonly used metals, leaving a continuous film after evaporation of the solvent.

This product may be applied by spray, dip or brush. A gallon will cover approximately 300 to 1,600 square feet, leaving a film 1 to 4 mils thick, depending upon the method of application and surface geometry. Optimal performance can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale.

It is recommended that the metal substrate and ambient temperature be 50-95°F (10-35°C) at the time of product
application.

Specification
Braycote 194 meets the requirements of and is qualified to MIL-PRF-16173E, Class I, Grade 4.

Removal
Braycote 194 can be removed from exposed surfaces by vapor degreasing, hot caustic, steam, or petroleum solvents.

The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

Contact Us