Total Traxium Axle 8 FE 80w-140

VISCOSITY - SAE 80w-140

Total Traxium Axle 8 FE 80w-140 Transmission Oil

DESCRIPTION

Traxium axle 8 FE 80W-140 is high performance multigrade oil designed for the lubrication of severely loaded hypoid axles and final reduction, requiring API GL-5 or API MT-1 levels of performance. It is recommended when filters are added to the lubrication system.

Particularly suitable for the lubrication axles from SCANIA and ZF, and also suitable for Renault Trucks, Volvo and Iveco axles.

TECHNOLOGY

Savings technology Reduce your maintenance costs.

With Savings technology, you will contribute over time to reduce your maintenance costs as your vehicle will run with fewer interruptions. Our products offer robust and consistent protection of your parts in all conditions, by offering performances that meet your needs in terms of reliability. Our oils are formulated to comply with multiple applications using different materials and operating under different conditions due to the protective film that is applied to the parts with powerful and long-lasting properties.

APPLICATIONS

Particularly suitable for the lubrication axles from SCANIA and ZF, and also suitable for Renault Trucks, Volvo and Iveco axles.

ADVANTAGES

Total Traxium Axle 8 FE 80w-140 Product Advantages:

Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
Reduced cost of maintenance: particularly adapted to reach the drain intervals recommended by the manufacturer.
Improved protection of axles against wear and corrosion due to extreme-pressure properties of oil.
Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
Improved stability in operation due to high viscosity index
High compatibility with oil filters due to anti-foam properties

TYPICAL CHARACTERISTICS

TYPICAL CHARACTERISTICS	UNITS	METHODS	Value
Volumetric mass at 15°C	kg/m 3	DIN 51757 D	887
Viscosity at 40°C	mm 2 /s	ASTM D445	252
Viscosity at 100°C	mm 2 /s	ASTM D445	25.5
Viscosity index	–	ASTM D2270	126
Pour point	°C	ASTM D97	-27

APPROVAL & PERFORMANCE CLAIMS

INTERNATIONAL STANDARDS
 API GL-5
 API MT-1
 MIL-PRF-2105E

MANUFACTURER APPROVALS
 SCANIA STO 1:0
 ZF TE-ML 05A, 12M, 16D, 21A

ADDITIONAL INFORMATION

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet