Total Traxium Gear 8 FE 75w-80

GET A QUOTE

VISCOSITY - SAE 75w-80

Total Traxium Gear 8 FE 75w-80 Transmission Oil

DESCRIPTION

Traxium gear 8 FE 75W80 is a fuel-economy manual transmission oil for commercial vehicles. It is recommended for commercial vehicles with ZF, EATON and certain VOLVO gearboxes. it is also suitable for manual transmissions of most OEMs like MAN, IVECO, DAF and RENAULT and has approved ZF TE-ML 01L and 02L ensuring compatibility with the latest gearboxes equipped with carbon and molybdenum synchronizers.

TECHNOLOGY

Savings technology Reduces your maintenance costs.

With Savings technology, you will contribute over time to reduce your maintenance costs as your vehicle will run with fewer interruptions. Our products offer robust and consistent protection of your parts in all conditions, by offering performances that meet your needs in terms of reliability. Our oils are formulated to comply with multiple applications using different materials and operating under different conditions due to the protective film that is applied to the parts with powerful and long-lasting properties.

APPLICATIONS

ADVANTAGES

Total Traxium Gear 8 FE 75w-80 Transmission Oil Product Advantages:

Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the
manufacturer.
Improved protection of manual gearboxes against wear and corrosion due to extreme-pressure properties of
oil.
Improved driver start-up experience: low-temperature fluidity due to a high viscosity index, generating benefits
during cold starts and limiting drag losses and fuel consumption.
Improved stability in operation due to high viscosity index
High compatibility with oil filters due to antifoam properties
Improved gear engagement: gear shiftability with a variety of synchroniser materials such as sinter, molybdenum
and carbon.

TYPICAL CHARACTERISTICS

TYPICAL CHARACTERISTICS	UNITS	METHODS	Value
Viscosity grade	–	ASTM D92	150
Density at 15°C	kg/m 3	DIN 51757 D	858
Kinematic viscosity at 40°C	mm 2 /s	ASTM D445	57.7
Kinematic viscosity at 100°C	mm 2 /s	ASTM D445	9.6
Flash point	°C	ASTM D92	240
Pour point	°C	ASTM D92	-42

APPROVAL & PERFORMANCE CLAIMS

INTERNATIONAL STANDARDS
 API GL-4

MANUFACTURER APPROVALS
 MAN 341 type E-3/Z-4
 ZF TE-ML 01L, 02L, 16K
 Volvo 97307

Suitable for
 EATON Manual Transmission

ADDITIONAL INFORMATION

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet