Total Traxium Axle 8 80w-90

GET A QUOTE

VISCOSITY - SAE 80w-90

Total Traxium Axle 8 80w-90 Transmission Oil

DESCRIPTION

Traxium axle 8 80W-90 is an oil specially designed for the lubrification of axles equipped with limited slip differentials, some classical axles and transfer gearboxes.

Suitable for use in all passenger cars and light commercial vehicles when the manufacturer requires an oil with specific friction properties.

Recommended by PSA for use in CITROËN and PEUGEOT 4-wheel drive cars and vans equipped with transfer gearboxes or axles. Also suitable for PSA synchronizers used in severe conditions (competition rally).

TECHNOLOGY

Savings technology

Reduce your maintenance costs. With Savings technology, you will contribute over time to reduce your maintenance costs as your vehicle will run with fewer interruptions. Our products offer robust and consistent protection of your parts in all conditions, by offering performances that meet your needs in terms of reliability. Our oils are formulated to comply on multiples application using different materials and operating under different conditions due to the protective film that is applied to the parts with powerful and long-lasting properties.

APPLICATIONS

Traxium axle 8 80W-90 is an oil specially designed for the lubrification of axles equipped with limited slip differentials, some classical axles and transfer gearboxes.

Suitable for use in all passenger cars and light commercial vehicles when the manufacturer requires an oil with specific friction properties.

ADVANTAGES

Total Traxium Axle 8 80w-90 Transmission Oil Product Advantages:

Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.
Improved protection of axles against wear and corrosion due to extreme-pressure properties of oil.
Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
Improved stability in operation due to high viscosity index
High compatibility with oil filters due to antifoam properties
Specifically designed for vehicles with 4WD

TYPICAL CHARACTERISTICS

TYPICAL CHARACTERISTICS	UNITS	METHODS	Value
Volumetric mass at 15°C	kg/m 3	DIN 51757 D	896
Viscosity at 40°C	mm 2 /s	ASTM D445	138
Viscosity at 100°C	mm 2 /s	ASTM D445	18
Viscosity index	–	ASTM D2270	145
Viscosity Brookfield at -26°C	mPa/s	–	43 000
Flash point	°C	ASTM D92	218
Pour point	°C	ASTM D97	-33

APPROVAL & PERFORMANCE CLAIMS

International classifications

Manufacturers specifications

Approved

ADDITIONAL INFORMATION

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet