Total Rubia TIR 8600 10w-40

GET A QUOTE

VISCOSITY - SAE 10w-40

Total Rubia TIR 8600 10w-40 Synthetic Technology Heavy Duty Diesel Engine Oil

DESCRIPTION

Total Rubia TIR 8600 10w-40 Heavy Duty Engine Oil – This high-performance motor oil is approved by Scania for its last generation of Euro 6 engines with long oil drain

intervals defined by the manufacturer.

Also recommended by most manufacturers, such as IVECO, for Euro 5 (and previous) engine models.

It exhibits a very high T.B.N level (Total base Number) (16 mgKOH/g) to neutralize acid compounds and prevent their corrosive attack.

APPLICATIONS

TOTAL RUBIA TIR 8600 10W-40 is a synthetic technology lubricant particularly suitable for use in on-road diesel heavy-duty applications.

This high-performance lubricant is approved by Scania for its latest generation of Euro 6 engines with long oil drain intervals defined by the manufacturer.

It is also recommended by most manufacturers, such as IVECO, for Euro 5 (and previous) engine models.

This highly versatile lubricant enables coverage of a fleet of mixed brands of engines (American and European manufacturers) with a minimal number of products.

ADVANTAGES

Total Rubia TIR 8600 10w-40 Synthetic Technology Heavy Duty Diesel Engine Oil Product Advantages:

High-quality synthetic base stocks combined with high-performance additives make TOTAL RUBIA TIR 8600 10W-40 an excellent performance lubricant, allowing smooth cold starts.
Its fully synthetic base stocks provide excellent thermal stability.
The association of detergent, antioxidant and anti-corrosion additives helps to reach extended oil drain intervals, as defined by most manufacturers, especially Scania, and reduces maintenance costs.
TOTAL RUBIA TIR 8600 10W-40 exhibits a very high T.B.N level (16 mgKOH/g) to neutralize acid compounds and prevent their corrosive attack.
Detergent, dispersant and anti-wear properties keep the engine’s most sensitive parts clean and enable effective control of soot, sludge and piston deposits.

TYPICAL CHARACTERISTICS

TYPICAL CHARACTERISTICS	METHODS	UNITS	Value
Density at 15°C	ASTM D1298	kg/m3	866
Kinematic Viscosity at 40°C	ASTM D445	mm2 /s	84.1
Kinematic Viscosity at 100°C	ASTM D445	mm2 /s	13
Viscosity Index	ASTM D2270	–	156
Flash point	ASTM D92	°C	243
Pour point	ASTM D97	°C	-42
T.B.N	ASTM D2896	mgKOH/g	16
Sulphated Ash	ASTM D874	% m/m	1.9

APPROVAL & PERFORMANCE CLAIMS

Manufacturers’ approvals

Mack EO-N
MAN M 3277
MB-Approval 228.5
Renault Trucks RXD/RLD-2
Scania LDF-3
Volvo VDS-3
VOITH Class A

Meets the requirements of

DAF
IVECO

ADDITIONAL INFORMATION

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet