Total Quartz INEO Xtra First 0w-20
VISCOSITY - SAE 0w-20
Total Quartz INEO Xtra First 0w-20 - Advanced Synthetic Technology Oil
TotalEnergies Quartz Ineo Xtra First 0W-20 is an advanced synthetic technology engine oil that has been formulated and used for Stellantis factory fill (of which the PSA Group is now part) and after sales.
This engine oil provides engines with the best possible protection against, wear and clogging, thanks to the pollution-control synthetic formulation. Further protection to the systems is also provided by the Low SAPs formulation (low content of sulphated ash, phosphorus and sulphur contents)
The 0W-20 grade, together with special additives, makes cold engine starts easier, even at very low temperatures (validation tests carried out down to -40C).
Quartz Ineo Xtra First 0W-20 is an advanced synthetic engine oil, formulated and used for Stellantis (ex-PSA Group) factory fill and after-sales.
This pollution-control synthetic engine oil provides engines with the best possible protection against wear and clogging.
The post-treatment systems, sensitive to the lubricants used and expensive to maintain, are also protected over the long-term thanks to the “Low SAPS” formulation (low content of sulphated ash, phosphorus and sulphur contents).
Using this engine oil can help generate fuel savings without the need to change driving style. It is also suitable for the most demanding driving conditions (door-to-door, sports driving, repeated start-ups, city and motorway driving, etc.).
Quartz Ineo Xtra First 0W-20 is particularly well-suited for use with recent engines of Stellantis/PSA (DV5R and EB2DT), and particularly ones equipped with BLUE HDi, PureTech using Stop & Start technologies, and hybrid engines which require new-generation engine oils.
Total Quartz INEO Xtra First 0w-20 – Advanced Synthetic Technology Oil Product Advantages:
-
Reduced environmental impact: Fuel savings of 3.33% as measured by the official ACEA M111 FE test It guarantees compliance with all the levels of performance claimed by Peugeot, Citroen and DS in relation to environmental standards
-
Easier cold starts: The 0W-20 grade, together with special additives, makes cold engine starts easier, even at very low temperatures (validation tests carried out down to -40C).
-
Protection for pollution-control systems: This oil also optimises the way in which three-way catalytic converters and particulate filters operate, preventing them from getting clogged up with soot or sludge deposits. This reduces particulate emissions, NOx, HC and CO in particular.
-
Engine protection and cleanliness: This oil offers the best possible protection in its category against wear and clogging as soon as the engine is started up.
-
Oil change intervals: Total Quartz Ineo Extra First 0w-20 retains all of its properties, in accordance with the service plans recommended by Peugeot, Citroen and DS.
TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
Viscosity Grade | SAE J300 | kg/m³ | 0W-20 |
Viscosity at 40 °C | ASTM D445 | mm²/s | 43.9 |
Viscosity at 100 °C | ASTM D445 | mm²/s | 8.2 |
Density at 15 °C | ASTM D1298 | kg/m3 | 845.4 |
Viscosity index | ASTM D2270 | 166 | |
Pour point | ASTM D97 | °C | -42 |
OC Flash point | ASTM D92 | °C | 233 |
International Standards:
ACEA C5
Manufacturer Approvals:
Peugeot & Citroen PSA B71 2010
Meets the requirements of Fiat 0.55535-DM1
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields