Total Quartz INEO First 0w-30
01736 757002VISCOSITY - SAE 0w-30
Total Quartz INEO First 0w-30 Synthetic Technology Engine oil
Total Quartz INEO First 0w-30 Synthetic Technology Engine oil – Fuel savings of 2.61% as measured by the official M111 FE test.
Easier cold starts: The 0W-30 grade, together with special additives, makes cold engine starts easier, even at very low temperatures (validation tests carried out down to -40°C) .
TOTAL QUARTZ INEO FIRST 0W-30 is used by PSA PEUGEOT CITROËN as first fill engine oil and is recommended by PEUGEOT, CITROËN and DS in after-sales. This pollution-control synthetic technology engine
oil provides engines with the best possible protection against wear and clogging.
The post-treatment systems, sensitive to the lubricants used and expensive to maintain, are also protected over the long-term thanks to the “Low SAPS” formulation (low content of sulphated ash, phosphorus and sulphur
contents). Using this engine oil can help generate fuel savings without changing the driving style.
It is also suitable for the most demanding driving conditions (door-to-door, sports driving, repeated start-ups, city and motorway driving, etc.).TOTAL QUARTZ INEO FIRST 0W-30 is particularly well-suited for use with recent engines of PSA, particularly ones equipped with e-HDI using Stop & Start technologies, and hybrid engines which require new-generation engine oils.
Total Quartz INEO First 0w-30 Synthetic Technology Engine oil Product Advantages:
- Reduced environmental impact: Fuel savings of 3,33% as measured by the official ACEA M111 FE test and savings above 4,2% as measured during the NEDC cycle compared with 5W-40 grade oil in compliance with the official ACEA test used for measuring CO2 emissions. It guarantees compliance with all the levels of performance claimed by PEUGEOT, CITROËN and DS in relation to environmental standards.
- Protection for pollution-control systems: This lubricant also optimises the way in which three-way catalytic converters and particulate filters operate, preventing them from getting clogged up with soot or sludge deposits. This reduces particulate emissions, NOx, HC and CO in particular.
• Engine protection and cleanliness: This oil offers the best possible protection in its category against wear and clogging as soon as the engine is started up.
• Easier cold starts: The 0W-30 grade, together with special additives, makes cold engine starts easier, even at very low temperatures (validation tests carried out down to -40C)
• Oil change intervals: TOTAL QUARTZ INEO FIRST 0W-30 retains all of its properties, in accordance with the service plans recommended by PEUGEOT, CITROËN and DS.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Viscosity grade | – | SAE J300 | 0W-30 |
| Kinematic viscosity at 40°C | mm²/s | ASTM D445 | 50.1 |
| Kinematic viscosity at 100°C | mm²/s | ASTM D445 | 9.8 |
| Density at 15°C | kg/m3 | ASTM D1298 | 843 |
| Viscosity index | – | ASTM D2270 | 187 |
| Pour point | °C | ASTM D97 | -48 OC |
| Flash point | °C | ASTM D92 | 234 |
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields