Total Quartz INEO Ecob 5w-20
01736 757002VISCOSITY - SAE 5w-30
Total Quartz INEO Ecob 5w-20 Synthetic Technology Engine oil
Total Quartz INEO Ecob 5w-20 Synthetic Technology Engine oil – 3.55% reduction in fuel consumption. Protection for pollution-control systems and optimizes the way in which three-way catalytic converters operate, preventing them from getting damaged through poisoning.
TOTAL Quartz Ineo ECOB 5W-20 is an advanced synthetic technology engine oil that provides the best protection against wear and deposits.
The post-treatment systems for GASOLINE engines, which are sensitive to the lubricants used and expensive to maintain, are also protected over the longterm thanks to the product’s low phosphorus content.
Its 5W-20 grade reduces internal friction within the engine as much as possible so that it can deliver full power, while at the same time generating fuel savings.
Quartz Ineo ECOB 5W-20 with specification Ford WSS-M2C-948-B is particularly well-suited for use with Ford’s GASOLINE powered engines (except the Ford Ka, Focus ST and Focus RS).
This oil is required for the 1.0L 3 cylinder EcoBoost engines. Quartz Ineo ECOB 5W-20 is advised for use in Jaguar Land Rover vehicles that require Jaguar Land Rover oil approval STJLR.03.5004.
TOTAL Quartz Ineo ECOB 5W-20 Synthetic Technology Engine oil Product Advantages:
- Reduced environmental impact: 3,55% reduction in fuel consumption, as measured by the official ACEA M111-FE test.
- Protection for pollution-control systems: With its low phosphorus content, this lubricant also optimises the way in which three-way catalytic converters operate, preventing them from getting damaged through poisoning.
- This reduces NOx, HC and CO in particular.
- Engine protection and cleanliness: This oil contains detergent and dispersive additives and offers the best possible protection in its category against wear and deposits.
- Easier cold starts: Easy cold starts due to its extreme fluidity at low temperature.
- Oil change intervals: To be modified based on the usage, please always refer to the car owner’s manual.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Viscosity grade | SAE J300 | – | 5W-20 |
| Kinematic viscosity at 40°C | ASTM D445 | mm²/s | 44 |
| Kinematic viscosity at 100°C | ASTM D445 | mm²/s | 8.2 |
| Density at 15°C | ASTM D1298 | kg/m3 | 851 |
| Viscosity index | 157 | – | 161 |
| Pour point | ASTM D97 | °C | -33 |
| Flash point | ASTM D92 | °C | 187 |
T E C H N O L O G Y
A g e – R e s i s t a n c e t e c h n o l o g y
The next gen oil for outstanding protection.
Age-Resistance technology provides expert protection, to fight everyday challenges in the long term.
Age-Resistance technology offers unbeatable engine protection. Its unique combination of hyperactive molecules creates a strong thick oil film on all concerned engine parts. Engines are absolutely protected against a variety of challenges, from wear to oil oxidation even at extreme temperatures.
Before using the Total Quartz INEO ECS product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields