Total Quartz INEO C1 5w-30
01736 757002VISCOSITY - SAE 5w-30
Total Quartz INEO C1 5w-30 Synthetic Technology Engine Oil
Total Quartz INEO C1 5w-30 Synthetic Technology Engine Oil – This lubricant ensures the performance and quality of the lubricant over time. It offers excellent engine protection and cleanliness. Thanks to its LOW SAPS formulation, TOTAL QUARTZ INEO C1 5W-30 enables a high reduction of pollutant emissions.
It satisfies the most demanding manufacturer service plans by permitting extra-long oil change intervals that can rise up to 30,000 km.
TECHNOLOGY Age-Resistance technology The next gen oil for outstanding protection. Age-Resistance technology provides expert protection, to fight everyday challenges in the long term. Age-Resistance technology offers unbeatable engine protection. It’s unique combination of hyperactive molecules creates a strong thick oil film on all concerned engine parts. Engines are absolutely protected against a variety of challenges, from wear to oil oxidation even at extreme temperatures.
TOTAL QUARTZ INEO C1 5W-30 is high-performance engine oil based on synthetic technology.
This low-viscosity lubricant is Recommended for both, gasoline and Diesel engines, especially the recent ones respecting the EURO IV & EURO V norms about emission reduction.
TOTAL QUARTZ INEO C1 5W-30 is particularly adapted to Ford, Land Rover and Jaguar gasoline and Diesel engines.
This product is suitable for the most severe conditions of use (sports driving, repeated start-ups, city and motorway driving).
Total Quartz INEO C1 5w-30 Synthetic Technology Engine Oil Product Advantages:
- Ensured performance and quality of the lubricant over time: TOTAL QUARTZ INEO C1 5W-30 Ensures outstanding engine longevity, thanks to a very high oxidation resistance.
- Excellent engine cleanliness and protection: Ensures maximum engine cleanliness, thanks to very good detergent and dispersion properties.
- Protection of the Diesel Particulate Filter: Enables, thanks to low rates of sulfur, ashes and phosphorus (low SAPS), a durability of post-treatment systems (in particular the DPF) that enables high reduction of pollutant emissions.
- Increased drain intervals: TOTAL QUARTZ INEO C1 5W-30 satisfies the most demanding manufacturer service plans by permitting extra-long oil change intervals that can rise up to 30 000 km.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Viscosity grade | SAE J300 | – | 5W-30 |
| Kinematic viscosity at 40°C | ASTM D445 | mm²/s | 58.3 |
| Kinematic viscosity at 100°C | ASTM D445 | mm²/s | 10.3 |
| Density at 15°C | ASTM D1298 | kg/m3 | 850 |
| Viscosity index | ASTM D2270 | – | 167 |
| Pour point | ASTM D97 | °C | -42 OC |
| Flash point | ASTM D92 | °C | 240 |
INTERNATIONAL STANDARDS
- ACEA C1
MANUFACTURER APPROVALS
- JAGUAR LAND ROVER STJLR.03.5005
- Meets the technical requirement FORD: WSS-M2C934-B
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields