Total Quartz D 7000 10w-40 (SN)
01736 757002VISCOSITY - SAE 10w-40
Total Quartz D 7000 10w-40 Diesel Engine Oil
Total Quartz D 7000 10w-40 Engine Oil diesel vehicles – its base oils and additives, provides a specific resistance to oxidation. Ensures good engine cleanliness , reducing particle accumulation in the motor via efficient dispersant power. Long-term wear protection of engine parts (distribution, ring, plunger and liner) increases engine life.
TECHNOLOGY
Clean-Shield technology The effective engine cleaning technology. 1 Please refer to car owner’s manual Thanks to advanced detergent molecules designed to capture and isolate dirt such as sludge and soots, Clean Shield technology keeps engines clean in the long term. Fighting against this major cause of breakdowns, Quartz with Clean Shield technology is the oil of choice across the globe to guarantee engine cleanliness during the entire drain interval and after oil change.
- Total Quartz D 7000 10W-40 is a synthetic-engine oil that has been developed to cover the most stringent requirements of diesel engines.
- Quartz D 7000 10W-40 is particularly suited to turbocharged and multi-valve engines.
- This engine oil is perfectly adapted to vehicles equipped with catalysts.
- Quartz D 7000 10W-40 is perfectly suited to normal driving conditions.
* The vehicle owner’s manual should be checked before using.
Total Quartz D 7000 10w-40 Diesel Engine Oil Product Advantages:
- Manufacturers Standards: Quartz D 7000 10W-40 satisfies rigorous manufacturers’ standards (see above), while guaranteeing perfect and constant quality.
- Resistance to Oxidation: Thanks to the good quality of its base oils and additives, Quartz D 7000 10W-40 provides a specific resistance to oxidation.
- Engine protection and cleanliness: This oil ensures good engine cleanliness, reducing particle accumulation in the motor via efficient dispersant power.
- Long-term wear Protection: Long-term wear protection of engine parts (distribution, ring, plunger and liner) increases engine life.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Viscosity Grade | SAE J300 | kg/m³ | 10W-40 |
| Viscosity at 40 °C | ASTM D445 | mm²/s | 95 |
| Viscosity at 100 °C | ASTM D445 | mm²/s | 14.3 |
| Density at 15 °C | ASTM D1298 | kg/m3 | 862.3 |
| Viscosity index | ASTM D2270 | 155 | |
| Pour point | ASTM D97 | °C | -36 |
| OC Flash point | ASTM D92 | °C | 220 |
INTERNATIONAL STANDARDS
ACEA A3/B4
API SN/CF
MANUFACTURER APPROVALS 1
PSA B71 2300 (backward compatible PSA B71 2294)
VW 501.01/505.00
RENAULT RN 0700/0710
Meets the requirements of:
MB 229.3
FIAT 9.55535-G2
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
