Total Nevastane XS 80
01736 757002VISCOSITY - ISO 80
Total Nevastane XS 80 Low Temp Extreme-Pressure Complex Grease - Suitable for Food Related Industries
Total Nevastane XS 80 Low Temp Extreme-Pressure Complex Grease – Suitable for Food-Related Industries.
- NEVASTANE XS 80 is a heavy duty multi purpose premium grease, based on an overbased calcium complex technology and synthetic oil especially designed for applications working under very low temperatures and/or high load conditions.
- NEVASTANE XS 80 is an EP multi purpose grease, recommended for various applications in the food and food related industry operating under severe conditions (high load, high temperature, water, dust).
- NEVASTANE XS 80 is very suitable to lubricate pelleting presses used in feed industry (pet food, sugar beet): KAHL, PROMILL, CPM, UMT, VAN AARSEN…).
- Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.
Total Nevastane XS 80 Low Temp Extreme-Pressure Complex Grease Product Advantages:
- Thanks to its very sophisticated formula and performance reserves, NEVASTANE XS 80 meets the most stringent industrial requirements.
- NEVASTANE XS 80 assures long machine life while reducing contamination problems as required by the Hazard Analysis and Critical Control Point System (HACCP).
- Excellent thermal stability. It regains its original texture after cooling to ambient temperature.
- Remarkable load resistance thanks to its naturally high extreme pressure and anti-wear properties.
- Extraordinary water resistance, no significant loss of consistency is observed even with high amounts of water entering the grease. Resistant to food acids and alkalis.
- Excellent anti-oxidation and anti-corrosion properties thanks to the very nature of the calcium sulfonates, also in the presence of salt water.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Soap/thickener
|
– | Calcium sulfonate | |
| NLGI grade
|
ASTM D 217/DIN 51 818 | – | 1 – 2 |
| Colour
|
Visual | – | Light brown |
| Appearance
|
Visual | – | Smooth |
| Operating temperature range
|
°C | – 55 to 150 | |
| Penetration at 25°C
|
ASTM D 217/DIN51 818 | 0.1 mm | 280 – 310 |
| Four ball weld load
|
ASTM D 2596 | kgf | >400 |
| Anti-rust performance SKF- EMCOR
|
DIN 51 802/IP220/NFT 60-135/ISO 11007
|
Rating
|
0 – 0
|
| Flow pressure 1400 mbar
|
DIN 51805
|
°C (mbar)
|
< -55 ( 1385)
|
| Dropping point
|
IP 396/NFT 60 102C | °C | > 300 |
| Kinematic viscosity of the base oil at 40°C | ASTM D 445/DIN 51 562-1/ISO 3104/ IP71 | mm²/s (cSt) | 80 |
- NEVASTANE XS 80 is formulated in accordance with US FDA Regulation 21 CFR, 178.3570.
- NEVASTANE XS 80 is NSF H1 registered: No 147140 and ISO 21469 certified.
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
