Total Nateria MP 40
01736 757002VISCOSITY - SAE 40
Total Nateria MP 40 Gas engine oil
Total Nateria MP 40 New generation low ash lubricant, specifically developed to extend oil drain interval and to protect natural gas engines.
- Lubrication of engines requiring a Low Ash oil, in power generation plants,
with or without cogeneration. - Developed for the most severe conditions: fast engines, high temperatures,
small oil sump capacity.
Total Nateria MP 40 New generation low ash lubricant Product Advantages:
- The use of hydrocracked base oils significantly increases oil drain interval, reducing the number of engine downtimes and running costs.
- Very low deposits-forming ensuring an excellent cleanliness of hot engine parts.
- The specific additives give important antiwear and anticorrosion properties, with a limited ash level, which guarantees compatibility with the exhaust gas treatment systems.
- High anti-wear properties for optimal protection of the most stressed parts.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| SAE Grade | – | – | 40 |
| Density at 15°C | ISO 3675 | kg/m³ | 874 |
| Kinematic viscosity at 40 °C | ISO 3104 | mm²/s | 122.5 |
| Kinematic viscosity at 100 °C | ISO 3104 | mm²/s | 13.8 |
| Viscosity index | ISO 2909 | – | 110 |
| Flash point OC | ISO 2592 | °C | 284 |
| Pour point | ISO 3016 | °C | – 30 |
| Sulphated ash | ISO 3987 | % | 0.48 |
| TBN | ASTM D 2896 | mgKOH/g | 4.6 |
Manufacturers specifications
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
