Total Multis Complex XHV2 Moly
01736 757002Total Multis Complex XHV2 Moly Lubricating Grease
Premium Mining, Off Road and Industrial grease with extreme pressure and thermal resistance properties containing 5% of solid lubricants.
- An extreme pressure and anti-wear grease containing solid lubricants consisting of 3% MoS2 and special friction modifiers to boost the performance of the grease in operation.
- Exceptional adhesive properties and extended service capabilities.
- Specially designed to handle the lubrification demands of equipment used in the mining industry. It is recommended for slow-moving plain and heavily loaded rolling element bearings subject to shock loads and high temperatures.
- Also recommended for the lubrication of slow-moving bearings, chassis parts, gears and couplings in automotive and industrial applications such as underground tunneling, cement sugar and crushing plants.
Total Multis Complex XHV2 Moly Lubricating Grease Product Advantages:
- Suitable for various types of equipment (swing gear, pin and bushes, bearings, etc…) then able to reduce the number of greases on site.
- Very good resistance to water, variations in temperature and pollution. Longer lubrication interval thanks to enhanced mechanical stability versus simple lithium greases
- Reduced wear induced by severe usage of equipment and increases the lifetime of parts.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Thickener | – | Complex Lithium | |
| NLGI Grade | ASTM D 217/DIN 51 818 | – | 2 |
| Color | Visual | – | Black |
| Appearance | Visual | – | Smooth |
| Base oil viscosity at 40°C | ASTM D 445/DIN 51 562-1/ISO 3104/IP71 | mm²/s (cSt) | 800 |
| Temparature range | °C | – 20 à 160 | |
| Penetration at 25°C | ASTM D 217/DIN51 818 | 0.1 mm | 265 – 295 |
| Dropping Point | IP 396/DIN ISO 2176 | °C | >240 |
| 4-ball Scar | ASTM D2266 | mm | 0.46 |
| 4-ball Weld load | ASTM D2596 | Kgf | ≥620 |
| Flow pressure at -20°C | DIN 51805-2 | mbar | <1400 |
| Oil separation – 168 hours at 40°C | DIN 51817 / ASTM D-1742 – IP21 | % | 2.0 |
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields