Industrial Grease

Total Multis Complex SHD 460
Brand Logo

VISCOSITY - ISO 460

Total Multis Complex SHD 460 Lubricating Grease

open
DESCRIPTION
Total MULTIS COMPLEX SHD 460 meets the lubrication requirements for very different types of equipment.
It slow traction coefficient makes it possible to anticipate enrgy gains and an increase in the service life of the bearings.
Miscible with most conventional soap greases (consult TOTAL Lubrifiants).
Very good resistance to water, variations in temperatuire and pollution. Permits longer lubrication intervals.
SHD 460 contains no lead or any other heavy metal deemed harmful to human health or the environment.
open
APPLICATIONS
  • A very high-performance synthetic grease is recommended for lubrication in all industrial applications under severe conditions and more especially designed in case of high-temperature applications in which a lithium grease or a conventional complex lithium grease is not sufficient.
  • Offers excellent protection of bearings subjected to high loads and slow to moderate rotational speeds. Is also suitable for applications under wet conditions. Could be used in the case of plastic contacts.
  • Specially designed for dry sections in the papermaking industry, in particular felt rolls. Moreover, the low volatility of the synthetic base oil together with the excellent high temperature properties enable maximization of the lubrication intervals.
  • Recommended for temperatures between -40°C and +160°C.
open
ADVANTAGES

Total Multis Complex SHD 460 Product Advantages:

  • Meets the lubrication requirements for very different types of equipment.
  • Its slow traction coefficient makes it possible to anticipate energy gains and an increase in the service life of the bearings.
  • Miscible with most conventional soap greases (consult TOTAL Lubrifiants).
  • Very good resistance to water, variations in temperature and pollution. Permits longer lubrication intervals.
  • MULTIS COMPLEX SHD 460 contains no lead or any other heavy metal deemed harmful to human health or the environment
open
TYPICAL CHARACTERISTICS
TYPICAL CHARACTERISTICS METHODS UNITS Value
Thickener Complex lithium
NLGI Grade ASTM D 217/DIN 51 818 – 1 2
Colour Visual Yellow Appearance
Visual – Smooth
Temperature range °C – 40 to 160
Penetration at 25°C ASTM D 217/DIN51 818 0.1 mm 290 – 320
Dropping Point IP 396/DIN ISO 2176 °C > 275
Water Wash-Out ASTM D1264 % weight 5
Flow pressure 1400 mbar DIN 51805 °C < -40°C
Flow pressure at -40 °C DIN 51805 mbar 500
4-ball wear DIN 51-350-T5 mm 0.37 4-ball EP ASTM D2596 Kgf 500
SKF- EMCOR Antirust performances DIN 51 802/IP220/NFT 60-135/ISO 11007 quotation 0 – 0
Base oil viscosity at 40°C ASTM D 445/DIN 51 562-1/ISO 3104/IP71 mm²/s (cSt) 460
open
APPROVAL & PERFORMANCE CLAIMS
INTERNATIONAL CLASSIFICATIONS

MANUFACTURERS SPECIFICATIONS

Approved:
Meets the requirements of:
Recommended products for :
open
ADDITIONAL INFORMATION

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us 

Product Data Sheet 

Total Multis Grease
PACK SIZES AVAILABLE
icon
24 x 400g
icon
17Kg
50Kg
180Kg

Request a quote for this product