Total Multis Complex SHD 220
01736 757002VISCOSITY - ISO 220
Total Multis Complex SHD 220 Lubricating Grease
Total MULTIS COMPLEX SHD 220 is a very high-performance synthetic grease recommended for lubrication in all industrial applications under severe conditions and more specially designed in case of high-temperature applications in which a lithium grease or a conventional complex lithium grease is not sufficient.
It offers excellent protection of bearings subjected to high loads and slow to moderate rotational speeds. Is also suitable for applications under wet conditions. Could be used in the case of plastic contacts.
Specially designed for dry sections in the papermaking industry, in particular felt rolls. Moreover, the low volatility of the synthetic base oil together with the excellent high-temperature properties enable maximization of the lubrication intervals.
MULTIS COMPLEX SHD 220 Product Advantages:
- Meets the lubrication requirements for very different types of equipment.
- Its slow traction coefficient makes it possible to anticipate energy gains and an increase in the service life of the bearings. Miscible with most conventional soap greases (consult TotalEnergies Lubrifiants).
- Very good resistance to water, variations in temperature and pollution.
- Permits longer lubrication intervals.
- MULTIS COMPLEX SHD 220 contains no lead or any other heavy metal deemed harmful to human health or the environment.
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
