Total Multis 2
01736 757002VISCOSITY - ISO 120
Total Multis 2 Lubricating grease
Total MULTIS 2 is a multipurpose grease for general lubrication under normal operating conditions and loads, formulated for lubrication of all kinds of universal applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.Homologated by Mercedes-Benz, Specifications for Operating Fluids Sheet 267.0
- MULTIS 2 is a multipurpose grease for general lubrication under normal operating conditions and loads, formulated for lubrication of all kinds of universal applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.
- Lubrication of all kinds of bearings and joints when the temperature and loading conditions are normal.
- Pre-eminently suitable for passenger car, light truck and leisure vehicle applications.
- Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.
Total Multis 2 Product Advantages:
- MULTIS 2 is miscible with most other conventional soap greases.
- Excellent mechanical stability avoiding ejection or loss of consistency during operation.
- Excellent pumpability due to the low temperature characteristics and smooth texture.
- Very good water resistance, even in a humid environment a sufficient lubricating film will be maintained.
- MULTIS 2 does not contain lead, or other heavy metals considered harmful to human health and the environment.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Soap/thickener | – | Lithium/ Calcium | |
| NLGI grade | ASTM D 217/DIN 51 818 | – | 2 |
| Colour | Visual | – | Glazy yellow |
| Appearance | Visual | – | Smooth |
| Operating temperature range | °C | -25 to 120 | |
| Penetration at 25°C | ASTM D 217/DIN51 818 | 0.1 mm | 265-295 |
| Anti-rust performance | SKF- EMCOR DIN 51 802/IP220/NFT 60-135/ISO 11007 | rating | 0-0 |
| Dropping point | IP 396/DIN ISO 2176 | °C | >185 |
| Kinematic viscosity of the base oil at 40°C | ASTM D 445/DIN 51 562-1/ISO 3104/IP71 | mm²/s (cSt) | 120 |
ISO 6743-9: L-XCCEA 2
DIN 51502: K2K -30
Approval Mercedes-Benz, Specifications for Operating Fluids Sheet 267.0
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
