Total Lunaria FR 68
01736 757002VISCOSITY - ISO 68
Total Lunaria FR 68 Refrigeration Compressor Oil
Wax-free naphthenic mineral oils for refrigeration compressors.
High chemical stability with refrigerants.
Absence of copper plating.
Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than – 15 °C).
Lubrication of cylinders, bearing and seals of refrigeration compressors.
The LUNARIA FR are compatible with most of chloro-fluorinated refrigerant gases and with ammonia in compatible service conditions: evaporator temperature higher than – 15 °C (*).
(*)In fact, for refrigerating applications with low-temperature ammonia, it is recommended to use the specific lubricants LUNARIA NH or LUNARIA SH.
Total Lunaria FR 68 Refrigeration Compressor Oil Product Advantages:
- High chemical stability with refrigerants.
- Absence of copper plating.
- Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than – 15 °C).
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Density at 15°C | ISO 3675 | kg/m³ | 900 |
| Viscosity at 40°C
|
ISO 3104
|
mm²/s | 68 |
| Viscosity at 100°C
|
ISO 3104
|
mm²/s | 7.0 |
| Pour point | ISO 3016 | °C | -33 |
| Flash point (open cup) | ISO 2592 | °C | 205 |
Conform with the specification:
ISO 6743-3 DRA et DRE
Suitable for the refrigerating compressors of the following constructors:
APV, BOCK, BITZER, GRAM, CARRIER, GRASSO, HOWDEN, J&E HALL, SABROE, YORK, LINDE
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out by the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
