Total Isovoltine II
VISCOSITY - ISO 10
Total Isovoltine II Insulating Oil
Pure non-inhibited mineral insulating oil.
- Total ISOVOLTINE II is a non-inhibited naphthenic mineral oil for transformers, rheostats, and circuit breakers using mineral oils.
Total Isolvoltine II Insulating Oil Product Advantages:
- High insulating capability.
- Low viscosity for effective cooling.
- Very good oxidation resistance giving long life.
- Very good low-temperature properties.
- Absolutely no impurities such as dissolved gas, water or suspended solids.
- Does not contain DBDS.
- Does not contain PCB.
TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
Density at 20 °C
|
ISO 12185 | kg/m³ | 882 |
Viscosity at 40 °C | ISO 3104 | mm²/s
|
10 |
Pour point
|
ISO 3016 | °C | – 49 |
Closed cup flash point
|
ISO 2719 | °C | 145 |
Dielectric strength: untreated oil
|
IEC 156 | kV | 40 – 60 |
Dielectric strength: oil after drying and filtering
|
IEC 296 | kV | 70 |
Corrosive sulfur
|
ASTM D 1275B | – | non corrosive |
Corrosive sulfur
|
CEI 62535 | – | non corrosive |
Corrosive sulfur | DIN 51353 | – | non corrosive |
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.