Total HBF 4
01736 757002VISCOSITY - Maintenance & Repair
Total HBF 4 Synthetic Brake Fluid
Hydraulic Synthetic fluid is recommended for brake circuits and clutch systems in all vehicles using synthetic fluid and requiring DOT 4 level. Miscible with other synthetic fluids of the chemical type such as DOT 3, DOT 4 and DOT 5.1. Not miscible with mineral-based fluids of LHM type or silicon-based fluids.Very high dry and wet boiling points adjusted to ever-increasing temperatures encountered in braking systems: prevents “vapour lock”.Resistant to moisture absorption. Viscosity is suitable at cold as well as high temperatures. Provides corrosion protection for metals used in braking systems: cast iron, aluminium, steel, copper, brass etc.Compatible with rubber seals and hoses.
- TOTAL HBF 4 is recommended for brake and clutch systems of all vehicles using
synthetic fluids when a DOT 4 level is required. - TOTAL HBF 4 is miscible with all other synthetic fluids of similar quality.
- TOTAL HBF 4 is not miscible with mineral based fluids (LHM) and silicon based fluids.
- The color of the product can vary from colorless to amber
Total HBF 4 Synthetic Brake Fluid Product Advantages:
- Synthetic fluid.
- Very high dry and wet boiling points adjusted to ever-increasing temperatures encountered in braking systems: prevents “vapour lock”.
- Resistant to moisture absorption.
- Viscosity is suitable for cold as well as high temperatures. Provides corrosion protection for metals used in braking systems: cast iron, aluminium, steel, copper, brass etc.
- Compatible with rubber seals and hoses.
| Unit | SAE Grade | |
| Volumetric mass at 20°C
|
kg/dm³ | 1.05 / 1.07 |
| Viscosity at – 40°C (max) (Spec KV-40<1800mm2
/S)
|
mm²/s | 1200 |
| Viscosity at 100°C (min)
|
mm²/s | 1,5 |
| Dry boiling point ERBP (min)
|
°C | 230 |
| Wet boiling point WERBP (min) | °C | 155 |
- SAE J 1704
- FMVSS 116 DOT 4
- ISO 4925 Class4
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields