Total Dynatrans VX FE
![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%20100%20100'%3E%3C/svg%3E)
![](https://www.kernow-oils.co.uk/wp-content/uploads/2021/07/KO-Wordpress_TOTAL_brand-Logo.png)
VISCOSITY - ISO 40
Total Dynatrans VX FE Agricultural & Earthmoving Machinery UTTO Lubricant For Axles, Transmissions & Hydraulics.
TOTAL DYNATRANS VX FE has been specially developed for transmissions with wet brakes requiring an API GL-4 lubricant in Off-Road vehicles (Public Works machinery, agricultural equipment…). It can be used in applications where an SAE 5W oil of this
type is needed.
This lubricant is also perfectly adapted to transmissions, requiring an API GL-4 UTTO (Universal Tractor Transmission Oil) lubricant.
TOTAL DYNATRANS VX FE is also designed to lubricate hydraulic systems, power-assisted steering and power-take-offs
(PTO) with wet clutches.
Total Dynatrans VX FE Agricultural & Earthmoving Machinery UTTO Product Advantages:
- TOTAL DYNATRANS VX FE is adapted to a wide range of agricultural and Public Works equipment and helps to reduce the stock and the number of lubricants.
- This lubricant shows excellent low-temperature performances (protects friction brakes against sticking) and high-temperature performances (protects against judder or excessive slip).
- TOTAL DYNATRANS VX FE is very resistant to heavy loads and therefore provides an extended durability of gears and hydraulic components.
- This lubricant has also an improved durability thanks to its non-conventional base oil nature.
- Its rheological and friction characteristics based on FUEL ECONOMY technology generate a reduction of the mechanical energy losses in the lubricated organ and then a fuel consumption reduction.
TYPICAL CHARACTERISTICS | METHODS | UNITS | |
Kinematic Viscosity at 40°C
| ASTM D445 | mm²/s | 40.3 |
Kinematic Viscosity at 100°C
| ASTM D445 | mm²/s | 7.7 |
Viscosity Index | ASTM D2270 | – | 165 |
Pour Point | ASTM D97 | °C | -42 |
INTERNATIONAL STANDARDS
- API GL-4
SUITABLE FOR
- JOHN DEERE JDM J20D
- VALTRA G2-B10
- CASE MS 1206/1207/1209
- NEW HOLLAND NH 410C
- CNH MAT 3505/3526
- VOLVO WB102
- DANA OHTM-UTTO-LV
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out following the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
![](https://www.kernow-oils.co.uk/wp-content/uploads/2020/04/20L-Container.png)
![](https://www.kernow-oils.co.uk/wp-content/uploads/2020/04/icon-oil-barrel-208l_icon.png)
![](https://www.kernow-oils.co.uk/wp-content/uploads/2019/10/IBC-Container-1000L.png)