Total Dynatrans MPV

Total Dynatrans MPV transmissions oil for immersed brakes and hydraulic systems This oil is suitable for a wide range of agricultural and Public Works equipment thus allowing the stock of lubricants to be reduced.

Excellent low-temperature performance (protects friction brakes against sticking) and high-temperature performance (protects against judder or slip).

Widely used in agricultural tractors and Public Works or handling equipment.

TOTAL DYNATRANS MPV has been especially developed for transmissions with wet brakes requiring an API GL-4 lubricant with
a 10W-30 or 80W viscosity grade, in both Off-Road and On-Road vehicles.

This lubricant is also perfectly adapted to automatic transmissions, torque converters and hydrostatic transmissions and more
generally to any transmissions requiring an UTTO (Universal Tractor Transmissions Oil) lubricant.

TOTAL DYNATRANS MPV is also designed to lubricate hydraulic systems, power-assisted steering and power-take-offs (PTO)
with wet clutches.

TOTAL DYNATRANS MPV Product Advantages:

• TOTAL DYNATRANS MPV is adapted to a wide range of agricultural and Public Works equipment and helps to reduce the stock and the number of lubricants.
• This lubricant shows excellent low-temperature performances (protects friction brakes against sticking) and high temperature performances (protects against judder or excessive slip).
• TOTAL DYNATRANS MPV has very good extreme pressure and anti-wear properties giving optimum protection of gears and hydraulic components.

INTERNATIONAL STANDARDS

• API GL-4

MEETS THE REQUIREMENTS OF

• MASSEY FERGUSON CMS M1143
• ALLISON C-4
• JOHN DEERE JDM J20C
• CLAAS / RENAULT AGRICULTURE
• FORD FNHA 2C 201.00 / M2C134-D
• Mc CORMICK HTX
• LIEBHERR

MANUFACTURER APPROVALS:

• MASSEY-FERGUSON CMS M1145
• VALTRA G2-08
• ZF TE ML 03E/03L/05F/06P/17E/21F
• VOLVO CE WB 101

SUITABLE FOR:

• CASE MS1207/MS1209
• CNH MAT 3505/3509/3525/3526/3540
• CATERPILLAR TO-2
• NEW HOLLAND NH 410C/NH 410B
• KOMATSU AXO 80
• MASSEY FERGUSON CMS M1135/M1141
• AGCO: ALLIS 821 XL
• JCB STANDARD 4000/2200

Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet