Total Dynatrans FR

TOTAL DYNATRANS FR is dedicated to the lubrication of mechanical transmissions requiring an API GL-4 product with SAE 80W or 20W-30 viscosity.

This lubricant is suitable for:

• Hydraulic lift, servo, transmission and steering systems
• Power-take-offs
• Driving axles equipped with wet brakes

Total Dynatrans FR Transmission Lubricant Advantages:

• Suitable for a wide range of agricultural machinery and public works equipment
• Simplifies maintenance management
• Used in heavy work conditions or in case of vibration phenomena during braking

INTERNATIONAL STANDARDS

• API GL-4

MEETS THE REQUIREMENTS OF

• CLAAS / RENAULT AGRICULTURE
• MASSEY FERGUSON CMS M1135/M1141
• FORD WSS-M2C86B / WSS-M2C86C
• NEW HOLLAND NH 420A

SUITABLE FOR

• KOMATSU
• JCB
• MANITOU

Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet