Total Dynatrans DA 80w-90
VISCOSITY - SAE 80w-90
Total Dynatrans DA 80w-90 - Limited Slip Axle and Differential Lubricant
Total Dynatrans DA 80W-90 is recommended for the lubrication of axles, differentials & final drives equipped with limited slip discs self-locking systems for construction & mining equipment, agricultural machinery, 4-wheel drive passenger cars and on-road vehicles.
This lubricant may also be used in traditional hypoid axles not equipped with a self-locking differential.
Total Dynatrans DA 80W-90 Product Advantages:
- Guarantees the high cleanliness of the limited slip discs installed in the axle
- Prevents noise and vibration under intensive use
- Thanks to its specific extreme pressure additives, it provides maximum protection of very highly loaded gears and gears subject to shocks
- Excellent compatibility with the disk friction materials
- Excellent performance with respect to seals
TYPICAL CHARACTERISTICS | METHODS | UNITS | |
Kinematic Viscosity at 40°C
|
ASTM D445 | mm²/s | 154 |
Kinematic Viscosity at 100°C
|
ASTM D445 | mm²/s | 16 |
Viscosity Index | ASTM D2270 | – | 108 |
Pour Point | ASTM D97 | °C | -36 |
Phosphorous content
|
ICP
|
ppm
|
2350 |
INTERNATIONAL STANDARDS
- API GL-5-LS
- MIL.L. 2105D
MEETS THE REQUIREMENTS OF
Construction & Mining equipment:
- LIEBHERR, TEREX, VOLVO, CASE, JCB…
Agricultural tractors:
- CLAAS-RENAULT, NEW-HOLLAND (NH-520B/520C), DEUTZ, STEYR, FORD (M2C 104A)
4 Wheel Drive passenger cars and all roads vehicles like:
- NISSAN, TOYOTA, GM,…
Trucks & Buses:
- ZF TE-ML 12C
MANUFACTURER APPROVALS
- ZF TE-ML 05C/21C
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.