Total Dynatrans ACX 50
VISCOSITY - SAE 50
Total Dynatrans ACX 50 Hydraulic systems and transmission components (axles or gearboxes)
Excellent anti-wear and anti-corrosion properties, increasing the durability of the lubricated organs TOTAL DYNATRANS ACX 50 should be used in replacement of CATERPILLAR HYDO Advanced 50, with a drain interval extension of up to 3000 working hours and more, within regular oil analysis.
TOTAL DYNATRANS ACX 50 is adapted to hydraulic system, powershift gearbox, axle and final drives for
which the manufacturer recommends a fluid meeting one of the aforementioned specifications.
TOTAL DYNATRANS ACX 50 is recommended for CATERPILLAR equipment, and between -10°C and +40°C:
• SAE 10W grade is used in hydraulic systems
• SAE 30 grade is used in powershift gearboxes
• SAE 50 grade is used in axles and final drives
TOTAL DYNATRANS ACX 50 product benefits:
- Excellent anti-wear and anti-corrosion properties, increasing the durability of the lubricated parts
- Good performance with respect to seals, without aggressiveness to rubber hoses
- Friction properties suitable to CATERPILLAR, KOMATSU and other Construction & Mining machinery providing long transmission life
- Very shear-stable viscosity preserving the hydraulic pump’s volumetric efficiency
- Good fluidity at low temperatures, providing good fluid flow during start-up
- Formulated with selected base oils associated with recently developed chemistry, providing better oxidation resistance at high temperatures
- The emulsifying property of the oil fully keeps water condensation in emulsion and prevents pump failures in the winter or rapid oil degradation in summer.
TYPICAL CHARACTERISTICS | METHODS | UNITS | 50 |
Kinematic Viscosity at 40°C
|
ASTM D445 | mm²/s | 195 |
Kinematic Viscosity at 100°C
|
ASTM D445 | mm²/s | 18.4 |
Viscosity Index | ASTM D2270 | – | 104 |
Pour Point | ASTM D97 | °C | -21 |
Meets the requirement of:
- API GL-4 / CF
- CATERPILLAR TO-4
- CATERPILLAR HYDO Advanced 30
- KOMATSU Micro Clutch Test
- (JCMAS)
Suitable for:
- KOMATSU
- DANA
- EATON-FULLER
- ROCKWELL
- JCB, etc…
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.