Total Carter SY 150

GET A QUOTE

VISCOSITY - ISO 150

Total Carter SY 150 Synthetic Lubricant For Enclosed Gear Drives

DESCRIPTION

Total Carter SY 150 Synthetic Lubricant is especially suited for use in industrial transmissions with a high slip rate such as spur gears, worm screws and gears operating at very high temperatures.

It offers a very high and shear-stable viscosity index along with a low coefficient of friction giving greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil. Its also possesses excellent thermal stability: extending oil lifetimes, very good foaming behaviour and fantastic extreme pressure and anti-wear properties as well as very high-level corrosion protection (tested with sea and acidic water).

Non-miscible with mineral oils and certain synthetic lubricants.

APPLICATIONS

Lubrication of gears operating under the most severe conditions (high loads,
shocks, extreme temperatures and corrosive atmospheres).
Lubrication of worm gears.

ADVANTAGES

Total Carter SY 150 Synthetic Lubricant For Enclosed Gear Drives Advantages:

Very high and shear stable viscosity index.
Low coefficient of friction: greater protection for non-ferrous parts, such as the
bronze ring gear in worm gear systems, offering an energy saving of between
5 and 10% compared with a mineral oil.
Excellent thermal stability: extended oil lifetime.
Very good foaming behaviour.
Excellent extreme pressure and anti-wear properties.
Very high level of corrosion protection (tested with sea and acidic water).

TYPICAL CHARACTERISTICS

TYPICAL CHARACTERISTICS	METHODS	UNITS	CARTER SY 150
Density at 15°C	ISO 3675	kg/m³	1004
Viscosity at 40°C	ISO 3104	mm²/s	150
Viscosity at100°C	ISO 3104	mm²/s	23
Viscosity index	ISO 2909	–	185
Flash point (open cup)	ISO 2592	°C	230
Pour Point	ISO 3016	°C	-33

APPROVAL & PERFORMANCE CLAIMS

DIN 51517 Part 3 ⇒ group CLP
NF-ISO 6743-6 category CKS/CKT
DAVID BROWN, CMD

ADDITIONAL INFORMATION

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Product Data Sheet