Total Carter SH 150

Total Carter SH 150 Synthetic Lubricant is especially suited for use in light to heavy-duty gearboxes where gears are subjected to very high loads and high temperatures in difficult environments.

Carter SH has been developed based on PAO (Polyalphaolefin) for enclosed gear drives to provide optimum gear protection against micro pitting and bearing protection against scuffing, under very severe and difficult conditions such as high loads and high operating temperatures.

This lubricant is highly suited lubricant for wind turbine gears.

Not compatible with PAG-based lubricants.

• TOTAL CARTER SH 150 has been developed to provide optimum lubrication for enclosed
  industrial gears and bearings, and under very severe conditions anti-wear and extreme
  pressure protection against scuffing.
  – Bevel and spur gears
  – Worm gears
  – Heavily loaded bearings and gear couplings.

Total Carter SH 150 Synthetic Lubricant For Enclosed Gear Drives Advantages:

• Excellent extreme-pressure performance: protection against high loads and micropitting.
• Very high natural viscosity index (shear stable) and low friction coefficient providing
  energy saving* up to 4 % compared to mineral oil lubrication.
• Very low pour point: operation at very low temperatures.
• Very good oxidation resistance: operation at high temperatures, and lifetime increased
  by a factor of 2 to 4.
• Compatible with seals and metals containing copper.

• DIN 51517 – 3 CLP
• ISO 12925-1 CKSMP
• AISI 224
• CINCINNATI MILACRON
• DAVID BROWN
• SIEMENS-FLENDER (VG 150 to VG 680)
• USINOR FT 161
• MÜLLER WEINGARTEN
• AGMA 9005 – E02

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet