Total Biohydran TMP 32
VISCOSITY - ISO 32
Total Biohydran TMP 32 Biodegradable Hydraulic Fluid - Ecolabel Certified
Total Biohydran TMP 32 Biodegradable Hydraulic Fluid is produced with renewable raw materials and contributes to CO2-emission reduction allowing this lubricant to be a special Ecolabel certified lubricant. Its high natural viscosity index gives BIOHYDRAN TMP a wide temperature operating window (-20°C to 80°C). This along with the very high shear stability of Total BIOHYDRAN TMP 32 will ensure the hydraulic equipment is kept to an optimum efficiency during the fluid service life.
The good lubricating properties, along with the wear and corrosion protection, will extend the life of the hydraulic system’s moving components.
- BIOHYDRAN TMP is a biodegradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties.
- BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc…
Total Biohydran TMP 32 Biodegradable Hydraulic Fluid – Ecolabel Certified Advantages:
- Produced with renewable raw materials, BIOHYDRAN TMP contributes to CO2-emission reduction.
- A high natural viscosity index gives BIOHYDRAN TMP a wide temperature operating window (-20°C to 80°C).
- The very high shear stability of BIOHYDRAN TMP will ensure the hydraulic equipment is kept to optimum efficiency during the fluid service life.
- The good lubricating properties, as well as the very good wear and corrosion protection, will extend the life of the hydraulic system’s moving components
TYPICAL CHARACTERISTICS | METHODS | UNITS | BIOHYDRAN SE 32 |
Appearance | visual | – | Clear |
Density at 15°C | ISO 3675 | kg/m³ | 913 |
Kinematic Viscosity at 40°C | ISO 3104 | mm²/s | 32 |
Kinematic Viscosity at 100°C | ISO 3104 | mm²/s | 7,4 |
Viscosity Index | ISO 2909 | – | 195 |
Flash Point | ISO 2592 | °C | 270 |
Pour Point | ISO 3016 | °C | – 42 |
- ISO 15380: HEES
- Registration number : FR/27/002 AFNOR CERTIFICATION.
- Reduced harm for water and soil during use. Reduced CO2 emissions.
- Meets the requirements of the Swedish Standard SS 15 54 34.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.