Total Azolla DZF 46

GET A QUOTE

VISCOSITY - ISO 46

Total Azolla DZF 46 Detergent & Anti-Wear Hydraulic Oil

DESCRIPTION

Total Azolla DZF 46 is a hydraulic oil with built-in detergent and anti-wear additives to clean, protect and support your machinery. This lubricant is ideally suited for use in hydraulic circuits where significant amounts of water are unavoidably introduced and when it is impossible to drain off the water (for instance on circuits that work around the clock). Total Azolla DZF 22 is also suited to any hydraulic circuit working under loaded conditions: lubrication of stamping presses for example as well as any hydraulic circuit which are subjected to high levels of pollution.

APPLICATIONS

Any hydraulic circuits where significant amounts of water are unavoidably introduced and
when it is impossible to drain off the water (for instance on circuits that work around the
clock).
Any hydraulic circuits working under loaded conditions : lubrication of stamping presses
for example (Müller Weingarten approval).
Any hydraulic circuits subjected to high levels of pollution.

ADVANTAGES

Total Azolla DZF 46 Detergent & Anti-Wear Hydraulic Oil Advantages:

Detergent characteristics allow the fluid to absorb large quantities of water while preserving its properties.
Detergent/Dispersant characteristics keeping the hydraulic system clean.
High thermal stability gives the fluid good resistance at high operating temperatures.
Excellent antiwear capacity ensuring an extended lifetime of product.
Excellent level of resistance to foaming (silicon-free defoamer) together with rapid air release.
Specially formulated to provide good filterability even in the presence of high water content.
Protection against rust and corrosion.

TYPICAL CHARACTERISTICS

TYPICAL CHARACTERISTICS	METHODS	UNITS	AZOLLA DZF 46
Density at 15 °C	ISO 3104	kg/m³	880
Kinematic viscosity at 40 °C	ISO 3104	mm²/s	46
Kinematic viscosity at 100 °C	ISO 3104	mm²/s	6.9
Viscosity index	ISO 2909	–	106
Cleveland flash point OC	ISO 2592	℃	215
Pour point	ISO 3016	℃	– 33
FZG test (A/8, 3/90), damage level	DIN 51 354	Stage	12
Brügger EP test	–	N/mm2	58

APPROVAL & PERFORMANCE CLAIMS

 ISO 6743-4 HM
 DIN 51 524 p 2, HLP-D (Detergent properties)
 MAN N 698 H-LPD
 MÜLLER WEINGARTEN

ADDITIONAL INFORMATION

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Product Data Sheet