Quaker Houghton Ferrocote 5856 BF T3

Quaker Houghton Ferrocote 5856 BF T3 is a solvent-based corrosion preventive oil for medium-term corrosion prevention for both final and in-process industrial applications.

Its thin-film leaves a slightly oily layer on the parts where applied.

The product includes a vapour corrosion inhibitor and is formulated for the long-term storage of bearings and machined parts.

Quaker Houghton Ferrocote 5856 BF T3 Concentration: Use as received.

Can be diluted with suitable solvent if required after consultation with Kernow Oils representative.

Applicable only on clean and dry surfaces.

The metal surface must be free of corrosion before applying our product.

Fingerprint, Noise reduction,

Quaker Houghton rust preventive products -if used properly-generally need a low level of maintenance.

For critical applications such as final preservation of bearing parts, it is advisable to test critical parameters periodically and to pay attention at all times to the application method to ensure good wetting properties and an evenly applied film. The ‘dry film’ coverage is critical to maintaining corrosion protection under good storage conditions. For dewatering products, when re-using the overspray it is recommended to keep a close eye if water has contaminated the fluid and the demulsification properties. If the overspray is stored, remember to regularly drain off any water separated prior to reapplying the product.

For more detailed information or instructions please consult a Kernow Oils representative.

QuakerHoughton Ferrocote 5856 BF T3 Advantages

• Contains no Barium or other heavy metals
• It provides a thin adherent film on the parts where applied
• It does not create sticky residues even on moving parts
• Provides lubrication
• Compatible with most maintenance lubricants, so no cleaning of moving parts (bearings) is needed prior to assembly