Total Multis Complex HV 2
01736 757002VISCOSITY - ISO 340
Total Multis Complex HV 2 Lubricating Grease
- MULTIS COMPLEX HV 2 is designed for the lubrication of various applications in all types
of operating conditions, but particularly where the loads and operation temperature are high
and the use of conventional lithium greases is limited. - MULTIS COMPLEX HV 2 is a true multi purpose grease, formulated for lubrication of
loaded slide-,ball-, and roller-bearings, wheel bearings, universal joints, chassis, and
various shock loaded or vibrating applications in transport, agriculture and off road vehicles. - Suitable as general purpose grease for industrial applications requiring a NLGI 2 grade
medium high viscosity Extreme Pressure grease. - Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use
a pneumatic pump system or cartridges.
Total Multis Complex HV 2 Lubricating Grease Product Advantages:
- Thanks to its sophisticated formulation MULTIS COMPLEX HV 2 meets a wide variety of
requirements. Its range of applications is extensive. - MULTIS COMPLEX HV 2 forms a lubricating film which is durable, and resistant to water,
temperature variations and pollution, and hence reduces maintenance and costs. - Miscible with most other conventional soap greases.
- MULTIS COMPLEX HV 2 does not contain lead, or other heavy metals considered harmful
to human health and the environment.
| TYPICAL CHARACTERISTICS | METHODS | UNITS | Value |
| Soap/thickener | – | Lithium complex | |
| NLGI grade | ASTM D 217/DIN 51 818 | – | 2 |
| Colour | Visual | – | Green |
| Appearance | Visual | – | Smooth |
| Operating temperature range | °C | -30 to 160 | |
| Penetration at 25°C | ASTM D 217/DIN51 818 | 0.1 mm | 265-295 |
| Four ball weld load | DIN 51 350-4 | daN | 360-380 |
| Anti-rust performance | SKF- EMCOR DIN 51 802/IP220/NFT 60-135/ISO 11007 | rating | 0-0 |
| Dropping point | IP 396/DIN ISO 2176 | °C | >260 |
| Kinematic viscosity of the base oil at 40°C | ASTM D 445/DIN 51 562-1/ISO 3104/IP71 | mm²/s (cSt) | 340 |
INTERNATIONAL CLASSIFICATIONS
MANUFACTURERS SPECIFICATIONS
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields