Lubric8 Cut G 298-22
01736 757002Lubric8 Cut G 298-22 Chlorine-Free Neat Cutting Oil
Lubric8 Cut G 298-22 is blended from solvent-refined mineral oil using selected additives affording a high level of lubricity and EP performance. Chlorine-free.
Suitable for machining a wide range of materials in various applications, including deep hole boring, broaching, H.D. tapping, threading and gear cutting. Arduous operations are overcome using high performance EP package.
Lubric8 Cut G 298-22 Chlorine-Free Neat Cutting Oil Product Benefits:
- Enhanced lubricity
- Good workpiece visibility
- Improved finish on machine parts
- Low oil mist levels
- Promotes extended tool life
| Appearance: | Amber Fluid |
| Kinematic Viscosity @ 40℃: | 20.8-24.00 cSt |
| Kinematic Viscosity @ 15℃: | 0.870-0.885 |
| Ester | Yes |
| Active Sulphur | Yes |
| Chlorine | No |
HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development.
Additional advice can also be obtained from your local representative.
Request a quote for this product
"*" indicates required fields