Lubric8 Cut 22 DAS 829
01736 757002Lubric8 Cut 22 DAS 829 Low Viscosity Metalwork Neat Cutting Oil
Lubric8 Cut DAS 829 is a low viscosity neat cutting oil with a high proportion of lubricity and chlorinated
EP additives for light to heavy-duty machining applications on ferrous and non-ferrous metals particularly under difficult operational conditions. Suitable for operations where no sulphur is required.
Use as received for applications requiring a low viscosity oil. Chlorine EP additives and esters with excellent lubricity give outstanding performance on operations requiring no sulphur in the formulation, also suitable for use on yellow metals.
developed for a wide range of machining operations such as broaching, gear cutting and machining of high nickel alloys, heat resisting stainless steel and high duty bronzes.
Lubric8 Cut 22 DAS 829 Low Viscosity Metalwork Neat Cutting Oil Product Benefits:
- Low viscosity ensures good flushing of machine debris.
- Suitable for a variety of machining operations and use on yellow metals.
- Suitable for light to heavy-duty tapping, broaching and deep hole drilling operations.
| Kinematic Viscosity @ 400C: | 13.0-15.4 cSt |
| Appearance Amber Oil | |
| Sulphur | No |
| Specific Gravity @ 15.60C: | 0.873 |
| Chlorine | Yes |
| Ester | Yes |
HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development.
Additional advice can also be obtained from your local representative.
Request a quote for this product
"*" indicates required fields