Lubric8 Cool SCF 1
01736 757002Lubric8 Cool SCF 1 Soluble Cutting Fluid
Lubric8 Cool SCF 1 is a soluble cutting fluid concentrate with superb stability when mixed with water at typically 3% – 10% concentration levels. It’s a high oil content cutting fluid concentrate which incorporates an excellent bio stability package giving a high quality, milky emulsion for most metalworking applications requiring a non E.P. performance fluid. This fluid can, however, be used at stronger dilution rates dependent on application.
Lubric8 Cool SCF 1 can be used on most general-purpose machining applications. It is important when mixing Lubric8 Cool SCF 1 that the concentrate is ALWAYS added to the water to form the most stable emulsion. Contains no added silicones. Soluble oil concentrates should always be stored inside and protected from frosty conditions and direct sunlight.
Lubric8 Cool SCF 1 Soluble Cutting Fluid Product Benefits:
- Can be used on ferrous and nonferrous applications.
- Leaves no sticky residues.
- Low foaming and scum formation tendencies.
- Pleasant for operator acceptability.
- Help keep machine tools clean.
- Good tramp oil rejection.
- Long sump life – good biostability.
| Appearance | Clear to Light Brown Fluid |
| pH at 3% in distilled water | 8.8 |
| Specific gravity @ 20 oC | 0.885 |
| Odour | Mild |
| Flash Point (C) | 195 |
| KV @ 40C (cSt) | 28.83 |
HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development.
Additional advice can also be obtained from your local representative.
Request a quote for this product
"*" indicates required fields