Lubric8 Cool M 325E

Lubric8 Cool M 325E is a low oil formaldehyde release biocide-free semi-synthetic watermix fluid designed for medium or hard water areas and is suitable for tough machining operations. It is a low-oil semi-synthetic product containing chlorine-free lubricity additives which give excellent cutting performance and surface finish.  The product is low foaming in use and can be used through spindle coolant systems. It is suitable for use on a variety of steel alloys and can be used for the machining of non-ferrous alloys. Is an extremely robust coolant and gives extended service life in the most difficult conditions. 

Machining operations:

Turning, Milling & Drilling

Tapping & Threading

Surface & cylindrical grinding 

Material suitability:

Ferrous alloys 

Aluminium alloys 

Yellow metals 

Recommended Dilutions: 

Turning, Milling & Drilling 4-6%

Tapping & Threading 5-7%

Surface & Cylindrical grinding 3-4%

Lubric8 Cool M 325E Semi-synthetic, Soluble Cooling Fluid Product Benefits:

• Designed for medium or hard water areas
• Ideal for tough, arduous machine operations
• Chlorine-free
• Low foaming
• Can be used through spindle coolant systems
• Excellent cutting performance and surface finish
• Suitable for use on a wide variety of metals
• Very robust giving extended service life in difficult conditions
• Formaldehyde release biocide-free 

HEALTH & SAFETY: This product has been manufactured to the highest standards and when used for the purpose recommended is unlikely to present any significant health hazards. A Material Safety Data Sheet is available. Indicated data are approximate values and are subject to the usual commercial fluctuations. All information is correct at the time of going to press to the best of our knowledge. This information may be subject to change without notification due to continual product research and development. 

Additional advice can also be obtained from your local representative. 

Contact Us 

Product Data Sheet