EVO Recycled Land Booms
VISCOSITY - Safety
EVO Recycled Land Booms - Oil and Fuel Land Booms Made from Landfill Destined Materials
EVO Recycled Land Booms – Oil and Fuel Land Booms Made from Landfill Destined Materials – Higher capacity than comparable polypropylene absorbents. Suitable for hazardous fluids such as oils, fuels, solvents and all hydrocarbons. It can also be used on all non-hazardous day-to-day leaks and spills. Available in various size options and suitable for a wide range of applications.
We stock a wide range of spill pads and loose spill products to suit your spill containment needs, EVO spill products provide a unique solution for companies pursuing higher ethical and environmental standards without compromising performance and value. They are manufactured in Britain from sustainable or recycled material and have a far smaller carbon footprint than the vast majority of similar spill products on the market.
As the largest manufacturer of spill kits in the UK with over 200 types of emergency products. The Fentex range of absorbents can control leaks and spills of practically any liquid from a small mercury spill to a can of oil up to a 2000-litre chemical spill. Fentex is leading the way in workplace spillage safety by constantly developing absorbents for new, and existing, problems.
Get advice on which products, kits and sizes are best for your premises and product usage, contact us and we can get a fluid engineer to advise you on the right products to ensure you are covered and compliant with the latest standards.
For use in the event of workplace accidents and spills. This range is ideal for use with more generic spillages around the workplace.
The Control of Pollution (Oil Storage) (England) Regulations 2001. Oil and fuel are stored outdoors.
All oil containers must be stored in a bunded area or on a drip tray (sump pallet). This is mandatory and it is an offence not to comply. The sump pallet must be sufficient to contain 110% of the maximum contents of the oil container. Where more than one container is stored, the bund should be capable of storing 110% of the largest container or 25% of the total volume stored, whichever is the greater.
Adequate spill protection equipment must be on hand. Staff should be trained to use the equipment to protect the environment in the event of an accidental spillage.
Why you need spill control:
- Compliance with regulations
- Internal environmental/safety standards
- Compliance with ISO14001
- Insurance liability
- Duty of care
Fentex EVO Recycled Land Booms – Product Advantages:
Oil and Fuel Land Booms are made from processed polypropylene offcuts and materials that would otherwise be sent to landfills.
- Safely absorb oils, fuels, solvents and all
- General Purpose Land Booms are made from highly absorbent recycled cotton fibres from the textile industry.
- Absorbs non-hazardous liquids and suitable for use in most workshop and manufacturing applications
PPG26 states the requirement to have Spill Kits on site to respond to any spills. Spill Kits containing plugging compound, drain protection and oil or chemical absorbents should be on site.
All staff should be trained in the use of this equipment. It is also recommended that vehicles transporting drums and IBCs carry spill protection.
Store in an indoor dry environment and check periodically for signs of damage or ingressing dampness.
The Control of Pollution (Oil Storage)(England) Regulations 2001. Oil and fuel are stored outdoors.
All oil containers must be stored in a bunded area or on a drip tray (sump pallet). This is mandatory and it is an offence not to comply. The sump pallet must be sufficient to contain 110% of the maximum contents of the oil container. Where more than one container is stored, the bund should be capable of storing 110% of the largest container or 25% of the total volume stored, whichever is the greater.
Adequate spill protection equipment must be on hand.
Staff should be trained to use the equipment to protect the environment in the event of an accidental spillage.
Get advice on which products, kits and sizes are best for your premises and product usage, contact us and we can get a fluid engineer to advise you on the right products to ensure you are covered and compliant with the latest standards.