Elf Sporti 9 C2/C3 5w-30

GET A QUOTE

VISCOSITY - SAE 5w-30

Elf Sporti 9 C2/C3 5w-30 High-Performance Synthetic Car Engine Oil

DESCRIPTION

High-performance synthetic technology lubricant, intended for lubricating all Gasoline and Diesel car engines. Specially formulated to ensure compatibility with post-treatment systems.

Enables the optimization of post-treatment that enables high reduction of pollutant emissions (Nox,CO²,CO) thanks to low rates of Sulphated Ash, Phosphorus and Sulphur (low SAPS).

Meets the most demanding OEMs requirements enabling extended oil change intervals (20 000 km), thanks to an outstanding oxidation resistance.Gives the engine an very good wear protection, due to its solid additive package and adapted viscosity.

Ensures maximum engine cleanliness, thanks to very good detergent and dispersion properties.

APPLICATIONS

All Petrol and Diesel engines, particularly those of recent technology

Recommended for all recent engines, multivalve, and turbocharged, direct injection, with or without catalytic converter.

Varied to severe journeys

Particularly adapted to recent diesel engines equipped with a post-treatment system (DPF)

ADVANTAGES

Elf Sporti 9 C2/C3 5w-30 High-Performance Synthetic Car Engine Oil – Product Advantages:

A better environmental protection

Enables the optimization of post-treatment that enables a high reduction of pollutant emissions (Nox, CO², CO) thanks to low rates of sulfur, ashes and phosphorus (low SAPs).

Extended oil change intervals

Meets the most demanding OEM requirements enabling extended oil change intervals (20000 km), thanks to an outstanding oxidation resistance.

Excellent engine protection and cleanliness

Gives the engine excellent wear protection, thanks to its very solid additive package and adapted viscosity.
Ensures maximum engine cleanliness, thanks to very good detergent and dispersion properties.

TYPICAL CHARACTERISTICS

TYPICAL CHARACTERISTICS	METHODS	UNITS	Value
Viscosity at 40°C	ASTM D445	mm2 /s	72,6
Viscosity at 100°C	ASTM 445	mm2 /s	12
Viscosity index	ASTM D2270	–	168
Pour point	ASTM D97	°C	-36
Flash point	ASTM D92	°C	238
T.B.N.	ASTM D2896	mgKOH/g	7,3

APPROVAL & PERFORMANCE CLAIMS

International specifications*
*check your drivers manual for OEM recommendation

ACEA C2/C3

API SN/CF

Meets the requirements of:

MB-229.52

ADDITIONAL INFORMATION

Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet