Castrol Tribol GR TT 1 PD
VISCOSITY - ISO 22
Castrol Tribol GR TT 1 PD Low-Temperarure Grease
Castrol Tribol GR TT 1 PD (previously called Optitemp TT1 ) is high-performance grease for applications with wide temperature ranges. It is especially suited for rolling and sliding bearings with medium bearing pressures. The additive combination Microflux Trans in Tribol GR TT 1 PD adjusts to varying operating conditions and actively prevents wear
- Rolling and sliding bearings
- Clutch bearings and wheel hubs.
- For bearings running at high speeds wh an x dm factor up to about 1 mio.
- Low-temperature applications.
- WideTemperature application range: – 60°C /- 76°F to +120°C/+248°F
Castrol Tribol GR TT 1 PD Low-Temperature Grease Product Advantages:
- Load carrying capacity.
- Optimum wear protection in the high load range.
- Temperature-independent over a wide application range.
- In certain applications can be used for lifetime lubrication.
- Excellent corrosion protection largely prevents fretting corrosion.
- Anticorrosive.
- Pumpable in centralized lubricating systems.
Operating temperature | Min. -60°C Max. 120°C |
---|---|
Viscosity | 15, 22 mm/s² at 40°C |
Viscosity index | 0 |
NLGI | 1 |
Oil type | Synthetic |
Thickener | Lithium / Inorganic |
Food grade | No |
Product type | Greases |
Applicable to these sectors | Automotive Manufacture, Machinery |
Operating temperature | Min. -60°C Max. 120°C |
---|---|
Viscosity | 15, 22 mm/s² at 40°C |
Viscosity index | 0 |
NLGI | 1 |
Oil type | Synthetic |
Thickener | Lithium / Inorganic |
Food grade | No |
Product type | Greases |
Applicable to these sectors | Automotive Manufacture, Machinery |
Storage:
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Please observe the specifications of the bearing manufacturers. TRIBOL GR TT 1 PD is not to be mixed with other greases. Thoroughly clean bearing before introducing the initial fill.
Maximum performance can only be assured if the product is not mixed with other lubricants. Fill bearing housing only about half full with grease
Request a quote for this product
"*" indicates required fields