Castrol Tribol GR 400-2 PD

Castrol Tribol GR 400 PD (previously called Olista Longtime) is a range of mineral oil based, lithium soap greases enhanced with the MicroFlux Trans (MFT) additive system. They are particularly suited for long-term lubrication and for heavy mechanical loads such as extremely high pressures, vibrations and shock loads.

• For long-term lubrication, even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range in highly loaded rolling and sliding bearings
• For open gear wheels and worm gears at low speeds
• Tribol GR 400-3 PD (previously called Olista Longtime 3 EP) is especially suited to highly loaded bearings in all areas of industry
• Temperature application range:
  • -30°C / – 22°F to + 140°C / + 284°F for Tribol GR 400-2 (previously called Olista Longtime 2)
  • -25°C / -13°F to +140°C / +284°F for Tribol GR 400-3 (previously called Olista Longtime 3 EP)

Compared to conventional greases, the Castrol Tribol GR 400-2 PD Grease provides the following advantages:

• Shortened running-in phase, suited for long-term and, in some cases, lifetime lubrication
• Outstanding load-bearing capacity
• Optimum wear protection in the high load range
• Smooths existing surface damage
• Significantly reduced coefficient of friction
• Age-resistant and shear-stable
• Resistant to cold and hot water
• Extraordinary adhesion, water and dirt-repellent
• Extended service life of machine elements
• Tribol GR 400-2 PD provides excellent corrosion protection
• Tribol GR 400-3 PD helps to prevent fretting corrosion

As a result of the above advantages, the Tribol GR 400 PD Range can help lower the costs of energy, maintenance and disposal.

Storage:

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

To minimise potential incompatibilities when converting to a new grease, all previous lubricants should be removed as much as possible before operation.

During initial operation, re-lubrication intervals should be monitored closely to ensure all previous lubricant is purged.

This product was previously called Olista Longtime Range. The name was changed in 2015.

Contact Us

Safety Data Sheet

Product Data Sheet