Castrol Molub-Alloy CH 22 Spray
01736 757002VISCOSITY - ISO 22
Castrol Molub-Alloy CH 22 Multi-Service Chain Lubricant Spray
Castrol Molub-Alloy CH 22 Spray (previously called Molub-Alloy Chain Oil 22 Spray) is a multi-service chain lubricant designed for use in a variety of plant-wide chain applications. These lubricants are manufactured from a combination of the highest quality components together with an anti-wear/extreme pressure additive system including advanced Molub Alloy lubricating solids. This product is also formulated to inhibit oxidation and to protect against rust and corrosion.
Molub-Alloy CH 22 Spray is an excellent lubricant for wire ropes, especially those with a sisal or polypropylene core. It is highly inhibited to protect against rust and corrosion to protect the rope from within.
Molub-Alloy CH 22 without the propellant can be used on conveyors and chains operating at temperatures up to 90°C/190°F. It can be used intermittently at higher temperatures up to 150°C/300°F but more frequent re-lubrication may be required uner these conditions. Application of Molub-Alloy CH 22 Spray contains propellant so care must be taken when applied.
- Resists accumulation of contamination and abrasive matter: The semi-dry lubrication properties provides a very light oil film, giving the appearance of a dry film. This ensures minimum pickup of abrasive dusts, lint, sand, and other particles, eliminating the formation of abrasive compounds which can increase wear and shorten chain life.
- Excellent EP and anti-wear protection under boundary conditions: The compounded Molub-Alloy solids provide superior protection during frequent start-up, slow speeds, and when high and/or shock loads are encountered.
- Superior friction reduction: Promote reduced energy consumption during cold start-up and overall cost savings due to less downtime, more efficient operation, longer parts life and extended lubrication intervals.
| Operating temperature | Max. 90°C |
|---|---|
| Viscosity | 22 mm/s² at 40°C |
| Viscosity index | 68 |
| Oil type | Mineral |
| Product type | Lubricating Oils |
| Applicable to these sectors | Automotive Manufacture, Cement, Chemicals, Machinery, Metal Goods, Metals, Pulp & Paper |
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
