Castrol Magnatec Hybrid 0w-16

GET A QUOTE

VISCOSITY - SAE 10w-40

Castrol Magnatec Hybrid 0w-16 For Hybrid Engine Vehicles

DESCRIPTION

Hybrid vehicles are different. The engine operates intermittently, swapping to electric power at low speeds to move the vehicle. In typical urban driving, the engine may only be in use for short periods before switching back to electric power so it is often running cooler than a non-hybrid.

Incredibly some hybrid engines can stop, switch to electric and re-start 500,000 times during their lifetime – that‘s 10 times more than a non-hybrid^.

These lower temperatures and many more restart moments create more contamination because without the extra heat from the engine, water and other contaminants remain in the oil.

All these hybrid challenges make it harder for the oil to protect against damaging engine wear.

^ Based on Castrol testing of mild engines representing an estimated 45% of the 2022 global hybrid parc

APPLICATIONS

Castrol MAGNATEC Hybrid helps protect against the specific issues that challenge hybrid engines. Its unique DUALOCK Technology Clings like a magnet and Locks together, forming a powerful forcefield of wear Protection, providing 50% better protection from low temperature1 and re-start2 engine wear.

Castrol MAGNATEC Hybrid delivers against HYSPEC – Castrol’s new standard for hybrid performance.

1 Tested versus the Sequence IVA API SN wear limit.

2 Tested versus the CEC OM646LA ACEA wear limits.

3 Across critical areas of contaminants, engine intermittency and system efficiency.

ADVANTAGES

Magnatec Intelligent Molecules:

Synthetic technology to provide increased protection in high and low-temperature applications;
Provides continuous protection for all driving conditions, styles and temperatures;
Delivers superior performance under extreme cold start-up conditions

TYPICAL CHARACTERISTICS

Name	Method	Units	Castrol MAGNATEC Hybrid 0w-16
Density @ 15C, Relative	ASTM D4052	g/ml	0.846
Viscosity, Kinematic 100C	ASTM D445	mm²/s	7.37
Viscosity, CCS -25C (10W)	ASTM D5293	mPa.s (cP)	5417
Viscosity, Kinematic 40C	ASTM D445	mm²/s	38
Viscosity Index	ASTM D2270	None	163
Pour Point	ASTM D97	°C	-42
Flash Point, PMCC	ASTM D93	°C	200
Ash, Sulphated	ASTM D874	% wt	0.86

APPROVAL & PERFORMANCE CLAIMS

API SP

ILSAC GF-6B

ADDITIONAL INFORMATION

Storage:

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Product Data Sheet

Material Safety Data Sheet